Volvo XC40 TWIN ENGINE 2019 Owner's Manual page 210

CLIMATE
||
3. Press Add timer .
> A pop-up window is shown.
NOTE
It is not possible to add a time setting if
there already are 8 settings entered for the
timer. Delete a time setting in order to be
able to add a new one.
4. Tap on Date to set the time for a single
date.
Tap on Days to set the time for one or
more days of the week.
Days
With : Activate/deactivate repetition
by ticking/unticking the box for
weekly .
5. With Date : Select the date for precondi-
tioning by scrolling the date list with the
arrows.
With Days : Select the days of the week
for preconditioning by tapping on the but-
tons for the days of the week.
6. Set the time when the preconditioning
should be finished by scrolling with the
arrows.
9 Applicable to fuel-driven auxiliary heater.
208
7. Tap on Confirm
setting.
> The time setting is added to the list and
is activated.
WARNING
Do not use preconditioning
In unventilated spaces indoors.
•
Exhaust gases are emitted if the heater
starts.
In locations with combustible or flam-
•
mable material nearby. Fuel, gas, long
grass, sawdust, etc. may ignite.
When there is a risk that the heater's
•
exhaust line may be blocked. For
Repeat
example, deep snow under the front
part of the car can obstruct the heat-
er's ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a
long time in advance.
Editing a time setting
1. Open the climate view in the centre dis-
play.
2. Select the Parking climate
in order to add the time
9 :
tab.
3. Press the time setting that is to be
changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting"
above.
Related information
Preconditioning (p. 205)
•
Preconditioning time setting (p. 207)
•
Activating and deactivating time setting
•
for preconditioning (p. 209)
Removing time setting for preconditioning
•
(p. 209)