Volvo XC40 TWIN ENGINE 2019 Owner's Manual page 143

WARNING
This system help to save energy - it cannot
determine in all situations when daylight is
too weak or sufficiently strong, e.g. in mist
and rain.
The driver is always responsible for ensur-
ing that the car is driven with the correct
beam pattern for the traffic situation and in
accordance with applicable traffic regula-
tions.
Related information
Lighting control (p. 138)
•
Ignition positions (p. 422)
•
Dipped beam (p. 141)
•
Daytime Running Lights
1
Dipped beam
When driving with the stalk switch's rotating
ring in the position, dipped beam is
activated automatically in weak daylight or
darkness or when the car's electrical system
is in ignition position II.
Stalk switch rotating ring in AUTO position.
With the stalk switch's rotating ring in
position, dipped beam is also activated auto-
matically if the rear fog lamp is activated.
With the stalk switch's rotating ring in the
position, dipped beam is always acti-
vated when the car's electrical system is in
ignition position II.
Tunnel detection
The car detects when it is driven into a tunnel
and switches from daytime running lights to
dipped beam.
Note that the rotating ring in the left-hand
stalk switch must be in mode for tunnel
detection to work.
Related information
Lighting control (p. 138)
•
Ignition positions (p. 422)
•
Daytime running lights (p. 140)
•
LIGHTING
141