Using Powerbot - Samsung POWERbot SR20K9350W Series User Manual

Using poWerbot

you must turn on the emergency switch before using poWerbot.
turning the power on/off
press the
3 second
Location recognizing function
fIf turning off the POWERbot and turning it back
on, the POWERbot will search the location that it
stopped previously and then clean the area where
was not cleaned before.
– When the location recognizing function operates,
the POWERbot searches the current location.
– If the searching is failed more than 3 times, the
POWERbot will start to clean from the beginning.
button for more than
ENGLISH-14
• When POWERbot is not used for
30 minutes, it will return to the docking
WARNING
station to charge itself automatically.
Using auto clean mode
The POWERbot moves and cleans automatically
until it cleans entire space once.
✻ ✻ Stop cleaning: Press the
Using Spot clean mode
The POWERbot cleans a localized area intensely.
recharging
You may command POWERbot to recharge at the
docking station automatically while it is in cleaning
process.
Note
f Start the cleaning again at the area within 1 m
around where the POWERbot stopped.
– If you start the cleaning at the area more than
1 m from where the POWERbot stopped,
it is difficult to search the location and the
POWERbot may clean the area where it already
cleaned.
button