Using Powerbot; Turning The Power On/Off; Starting Auto Clean Mode; Starting Spot Clean Mode - Samsung POWERbot SR20K9000U Series User Manual

Using poWerbot

you must turn on the emergency switch on the bottom of the unit before using poWerbot.

turning the power on/off

press the button for more than
3 seconds
• When POWERbot is not used for
30 minutes, power will turn off
WARNING
automatically.

Starting auto clean mode

Press and release this button. Cleans all set places
until the battery is depleted.
✻ ✻ Stop cleaning: Press and release the

Starting Spot clean mode

Press and release this button. The POWERbot
cleans a localized area intensely.

recharging

fRecharging
You can command POWERbot to recharge at the
docking station automatically while it is cleaning
by pressing this button.
ENGLISH-12
button