Notes And Cautions - Samsung POWERbot SR20K9350W Series User Manual

Hide thumbs Also See for POWERbot SR20K9350W Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

notes and cautions

Charging
Note
f If the battery overheats during charging, it
may take longer to charge.
f When automatic charging is not working,
please check the followings.
– Turn the emergency switch (on the bottom of
POWERbot) off and on again.
– Unplug the docking station's power plug and
then plug it back on.
– Check whether there is any foreign matter in
the charge pins and clean POWERbot and the
charge pins of the docking station with a dry
cloth or rag.
– Check for any obstacles such as reflective
objects, chairs, etc. near the docking station.
f If POWERbot is left detached from the
docking station, the battery will drain naturally.
– Try to keep POWERbot being charged on the
docking station. (Turn off the emergency switch
and leave the docking station unplugged when
planning to leave the house for long periods of
time by going on a business trip or vacation,
etc., )
in use
Note
f The POWERbot may get caught on
thresholds, etc. during cleaning.
– To restart operation, shut off the emergency
switch, move POWERbot to an area where it
can move easily and then turn on the power
again.
f The POWERbot cannot completely clean
areas it cannot enter, such as corners,
between the wall and sofa, etc.
– Please use another cleaning tool to clean them
regularly.
f The POWERbot cannot vacuum clumps of
dirt, so some may remain on the floor after
cleaning.
– Please use another cleaning tool to clean them
regularly.
f If the battery becomes low during Auto clean
mode, POWERbot will recharge and finish
cleaning the remaining area after recharging.
(Repeat cleaning frequency: 1 time)
f You cannot select and execute Spot clean
mode while charging.
f If you press Manual clean / Point cleaning
button while charging, the POWERbot will be
detached from the docking station and then
turn into the standby mode.
f Do not lie down around the POWERBOT that
is running.
– Your hair may be caught in the Pet brush,
resulting in physical injury
Cleaning and maintenance
Note
f If you washed the dustbin and filter with water
– Dustbin: Completely wipe out the water.
– Filter: Completely dry it in a shade before use.
caution
f Watch your finger when attaching or
detaching the filter, since they may get stuck
in the dustbin's intake.
f To avoid blockages by foreign matter, do not
let toothpicks, cotton swabs etc. from being
vacuumed by POWERbot.
f If it is difficult to remove foreign matters from
the Pet brush, contact a service center.
f Since the Pet brush removes dirt from the
floor during cleaning, foreign matters such as
thread, long hair, etc. may get caught in it.
Therefore check and clean it regularly.
ENGLISH-27

Advertisement

Table of Contents
loading

Table of Contents