Page 390 of 396
NT8D7205
553-3001-201
Standard 1.00
Non-standard cables
•
P1 Connector - 15-pin, female, subminiature D with jack-screws
•
P2 Connector - 15-pin, male, subminiature D, with slide-latch (optional
spring-latch loose-packed with cable assembly)
Table 111
QCAD133 wire list
Color
WHITE
BLACK
GRN SHLD
RED
BLACK
RED SHLD
This cable is used to transport the 2Mb digital signal from the I/O panel at the
cabinet bulkhead to the Network Channel Terminating Equipment (NCTE)
telephone company interface.
•
Standard length - 15.3 m (50 ft.)
•
Construction - Individually foil-shielded, twisted pairs, 24 AWG (0.511
mm), stranded
•
P1 Connector - 9-pin, female, subminiature D with jack-screws
•
P2 Connector - 9-pin, male, subminiature D, with jack screws
October 2003
From
To
P1-1
P2-1
P1-9
P2-9
P1-2
nc
P1-3
P2-3
P1-11
P2-11
P1-4
nc
PRI signal
XTIP (transmit tip) to
telephone company
XRING (transmit ring) to
telephone company
GND (ground)
RTIP (receive tip) from
telephone company
RRING (receive ring) from
telephone company
GND (ground)