Advertisement
INSTALLATION INSTRUCTIONS
Connecting the Wiring (Units That Come from the
Factory Without a Power Cord Attached...cont.)
18 Feed the power cable into the unit. The unit may be
wired for connection directly to a junction box or for use
with a power plug that connects to an electrical outlet
meeting the SPECIFICATIONS.
19 Connect the wires on the power cable to the
ELECTRICAL SCHEMATIC.
20 Tighten the strain relief and replace the front cover.
Electrical Connection
Connection to a Junction Box
WARNING: Turn off power to the junction box at
the circuit breaker panel and lock out and tag
the circuit breaker before connecting the power
cable to the junction box.
21 Connect the power cable wires to the terminals in
the junction box and replace the cover. See the
ELECTRICAL SCHEMATIC for the power supply
requirements.
Connection to an Electrical Outlet
WARNING: Connect the power cord only to the
appropriate type and size electrical outlet. If it is not
compatible, either have the cord replaced or have
the electrical outlet upgraded by a licensed
electrician. Do not use an extension cord. Do not
use a power cord/plug that is damaged.
22 If not already installed, install the appropriate type of
power plug for your locality. Consult local electrical
codes to determine the approved type of power plug
for your region.
23 Connect the power plug to the appropriate electrical
outlet.
continued...
Power
cable
Strain
relief
Terminal
block
Power cable
from brewer
Required plug style
II22
varies with circuit
requirements
090919C
Advertisement
