Table of Contents
Advertisement
9. VictronConnect - Orion Smart DC-DC Charger
9.1. Introduction
Thank you for using VictronConnect. This guide will help you get the most out of your Orion Smart DC-DC Charger and it requires
a minimum knowledge of this charger that can be found in the introduction. The information available here applies to all Orion
Smart DC-DC Chargers. To simplify the reference to the Orion Smart DC-DC Charger, it will be refer as just Orion Smart in this
guide.
More general information about the VictonConnect App - how to install it; how to pair it with your device; and how to update
firmware, for example - can be found by referring to the overall
Note: Where input and battery voltage is referred to in these instructions, a 12V input and battery is assumed. Please multiply the
given values by 2 to arrive at settings for an installation configured for 24V.
9.2. Live Data Information
9.2.1. Instant Readout over BLE
VictronConnect can display key data of the Orion Smart (and other compatible smart products) on the Device list page without
the need to connect to the product. This includes visual notifications of warnings, alarms, and errors that enable diagnostics at a
glance.
The advantage is:
• Better range than a regular Bluetooth connection
• No need to connect to the smart product
• Key data at a glance
• Encrypted data
Please see the
Instant Readout chapter
9.2.2. Charger Mode - STATUS tab
• Orion Smart [SERIAL NUMBER] confirms the connected device. A custom name can also be set if desired.
• Mode icon shows in which mode the Orion Smart is operating (Charger in this case)
• Charger State:
Page 15
Orion-Tr Smart DC-DC Charger Isolated
VictronConnect
in the VictronConnect manual for more information and how to set it up.
manual.
VictronConnect - Orion Smart DC-DC
Charger
Advertisement
Table of Contents
