4 Operation
Room cleaning mode (Supported by the relevant mobile
application only)
You may specify the rooms you want to be cleaned with the mobile application, then the
robot vacuum cleaner cleans only the room(s) that is/are marked in the map.
The robot vacuum cleaner may also enter the areas other than the selected area after
●
■
it starts cleaning; thus please remove the obstacles on the ground around the selected
area. Area selection does not provide a secure isolation.
Regional cleaning may only be started after the robot vacuum cleaner successfully
●
■
creates a map.
Regional cleaning mode (Supported by the relevant mobile
application only)
Select regional cleaning mode in the application and then specify a cleaning area. The
robot vacuum cleaner only cleans the selected area and then returns to the charging
dock.
Regional cleaning may only be started after the robot vacuum cleaner successfully
●
■
creates a map.
Refer to the mobile application operation manual for detailed usage tips.
ENGLISH 20
The dimensions of the region can be
determined by holding from the right
bottom corner. In the meantime, the
dimensions of the displayed area are
written on the screen with the dotted line.