Hitachi RV-X20M Instruction Manual page 19

4 Operation
Wi-Fi Status
White light is flashing
slowly.
Network security requirements:
Use TKIP, PSK and AES/CCMP encrypted WPA and WPA2 networks.
4.3.2 Operation modes
Map Management
A. Real time mapping
Real time creation of a house map may help you understand the cleaning route and the
cleaning environment easily. A map of the house is created after cleaning. The map is
updated in real time during each vacuuming operation to ensure a normal navigation. To
create a complete house map;
a. Open the doors of your rooms for the robot vacuum cleaner to map each room;
b. Remove any objects that may cause obstruction or blockage of the robot vacuum
cleaner;
c. Do not change the location of the charging dock or unplug it after the map is created.
B. Repositioning and remapping
If the robot vacuum cleaner is relocated or significant changes are made in the
environment, the robot vacuum cleaner tries to reposition to adapt to the new
environment and may create the relevant map again. The details are as follows:
a. If repositioning is successful, the robot vacuum cleaner continues on cleaning;
b. If repositioning is unsuccessful, the robot vacuum cleaner starts over to scan in order to
make the mapping again.
WARNING: Ensure that the robot vacuum cleaner always starts the cleaning
operation from the charging dock.
During cleaning, do not intervene in the robot vacuum cleaner or change its location.
Root Cause
Wi-Fi is reset.
Solution
Ensure the Wi-Fi
●
■
connection of the robot
vacuum cleaner. Please
review the Mobile
Application Manual for
detailed directions. Reset
the Wi-Fi connection, if
required. Please refer to
the "Resetting the Wi-Fi"
section of this manual
ENGLISH 19