Installation - Hitachi RV-X20M Instruction Manual

3 Installation

3.1 Remove the protective sponges.
3.2 Install the charging station.
Install the adaptor plug to the charging station and set the cables up to prevent the
adaptor cable from wrapping around the machine during vacuuming.
To ensure a smooth operation of the robot, it is advised that no obstacles are present
within 1.5 m on the front and within 0.5 m on the left and right sides.
Always keep the charging station plugged, otherwise the robot vacuum
cleaner cannot return to the charging station automatically.
For a smooth charging operation, do not move the charging station. When the
location is changed, it may delete the available map and create a new map
due to the positioning error.
ENGLISH 14
Install the charging station
in a location where it can
easily be accessed by the
vacuum cleaner. Install the
charging station on a hard
and level ground rather
than a carpet.