Table of Contents
Advertisement
Available languages
Available languages
5 Cleaning and maintenance
2. Replace the brush after cleaning it and close the cover in the direction of the arrow.
5.3 Cleaning and installation of the side brush
In the long term use, wash the side brush with warm water in order to eliminate the shape
deformation.
Install it to the robot as it is shown after it has dried.
5.4 Cleaning of the sensors
Clean the sensors and charging pins/electrodes regularly and remove the dust using a
dry and soft cloth or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is required.
Charging pins
Wheel shaft
ENGLISH 26
Advertisement
Table of Contents
