Hitachi RV-X20M Instruction Manual page 22

4 Operation
Remove the swab on the
mop retainer as it is shown.
Install the mop retainer to
the dust container and the
water tank assembly (two in
one) in the direction of the
arrow.
4.4.2 Wet mopping setting
You may start the cleaning operation by selecting the cleaning mode and set the level of
wetness during mopping as desired in the application.
It is advised that you remove your carpets or you add a virtual wall (mop prohibited area)
to the carpet area on the application in order to keep the vacuum cleaner away from
the carpet to prevent the wetting of the carpet by the robot vacuum cleaner during the
mopping operation.
ENGLISH 22
Moisten the swab before
each mopping.
Install the dust container
and the water tank
assembly (two in one) to
the appliance, their places
in the direction of the arrow.
Place the swab to the mop
retainer.