Advertisement
Available languages
Available languages
disc to lateral pressure. Do not strain the power tool so heavily that it comes to a standstill.
Excessive feed considerably reduces the performance capability of the machine and shortens
the service life of the cutting disc. Use only cutting discs that are suitable for the material to
be worked.
9.
Maintenance and Service.
9.1.
Maintenance and Cleaning.
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and ventilation slots clean.
In extreme conditions, always use dust extraction as far as possible. Blow out ventilation
slots frequently and install a residual current device (RCD). When working metals, conductive
dust can settle in the interior of the power tool. The total insulation of the power tool can be
impaired.
9.2.
Have maintenance and repair work performed only by qualified specialists. In this
manner, it can be ensured that the safety of the power tool is maintained.
The retracting blade guard must always be able to move freely and retract automatically.
Therefore, always keep the area around the retracting blade guard clean.
10.
Disposal.
The machine, accessories and packaging should be sorted for environmental-friendly
recycling. The plastic components are labelled for categorized recycling. Do not dispose of
power tools into household waste! According the European Guideline 2012/19/EC for Waste
Electrical and Electronic Equipment and its implementation into national right, power tools
that are no longer usable must be collected separately and disposed of in an environmentally
correct manner.
INSTRUCTIUNI DE SIGURANTA
15
Advertisement
