Changing Clipit™ Covers - Siemens C65 User Manual

12 Getting started
Changing CLIPIt™
covers
You can use CLIPIt™ covers (accesso-
ries) to personalise the appearance
of your phone as you wish.
Before changing the keypad or
faceplate, switch the phone off.
Dismantle the phone
Take off the battery cover and
remove the battery (see p. 10). To
remove the faceplate, insert the key
into the opening provided, apply
slight pressure
2
same time to open the lock.
Do not use the key to lift the phone
as this could damage the faceplate.
2
1
1
and turn it at the
Assemble the phone
First insert the keypad mat
the faceplate. Ensure that it is sitting
exactly in place.
*) If there are small pins at the bot-
tom of the faceplate: position the
tabs on both sides of the keypad mat
precisely on these pins. before car-
4
rying out step
3
Insert the phone into the bottom of
the upper faceplate
push it in carefully until it clicks into
5
position . Finally, replace battery
cover (see p. 10).
5
4
3
into
.
4
and then