Direct Call; Switch Off - Siemens C65 User Manual

Direct call

If this is active, only one number can
be dialled.
Switch on
¢ ¢
Security
C
T
¢
Direct call
Confirm selection.
C
Enter phone code.
J
When first prompted you define and
enter the phone code (4 - 8 digits).
Confirm selection.
C
Please do not forget this code (p. 19)!
Select phone number
/
Ï
J
from the Phone-
book/Addressbook or
enter it.
Confirm.
C
Apply
To dial the phone number
§Carol§
(e.g. Carol's phone
number), press and hold
the right soft key.

Switch off

Press and hold.
#
Enter phone code.
J
Confirm input.
C
Control codes (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists. These
entries are transmitted directly as
DTMFcodes (control codes).
Open menu.
§Options§
Send DTMF
Select.
Using the Phonebook/
Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phone-
book/Addressbook in the same way
as a normal entry, see p. 32.
Enter phone number.
J
Press and hold until a "+"
appears in the display
0
(wait for the connection
to be established).
Enter DTMF codes
(numbers).
J
If necessary, wait again
for three seconds at a
0
time for the receiver to
process the entries safely.
Enter a name.
J
Store entry.
§Save§
You may also store just the
DTMFcodes (numbers) and then
send them during the call.
Calling 31