Dismantle the phone
To remove the upper faceplate re-
move the battery cover (see p.10).
Use your fingers to press the side
and insert your finger nail
into the division between the upper
and lower faceplates
the hooks in the lower part.
Assemble the phone
First insert the keypad mat
the upper faceplate. Ensure that it is
sitting exactly in place.
Insert the phone into the bottom of
the upper faceplate
push it in carefully until it clicks into
. Finally, replace battery
cover (see p. 15).
Please switch the phone off before chang-
ing the keypad mat or faceplate.
The new keypad has an additional key be-
neath the joystick to permit direct access
to the Internet information from the service