燃料供給上限の画面では、バーンポットに(燃焼室)に供給される燃料の量を調整できます。
The Feed Limit screen allows you to adjust the amount of fuel being fed to the burn
工場出荷時には、65%に設定されていて、これはほとんどのペレットに対して最適な量です。
燃料の質によっては調整が必要な場合があります。
pot. The factory default for this is 65% which is best for most pellets. Adjustment may
be needed based on fuel quality.
調整方法
To Adjust:
•
Move the slider bar by tapping or sliding it to the desired adjustment
・画面上のスライドバーを押すまたは左右にさせて希望の%に調整してください。
•
Decrease your feed limit if you see unburnt pellets falling into the ash pan
・燃え尽きていない燃料が、灰受け皿に落ちているようでしたら、上限を下げてください。
•
Increase your feed limit to maintain approximately one inch of completely
・完全燃焼し灰となった状態の奥行きが、バーンポットの先端から奥へ概ね25㎜残るように上
burnt pellets on the burn pot
限を設定してください。
本体出力の運転モードで出力を最大にして、30分以上燃焼させ調整を行います。
早く燃え尽きる燃料は灰の奥行きが長くなり、燃えにくい燃料は短くなります。
同じ燃料を使用する場合は、一旦この調整を行えば再度調整する必要はありません。
12
Feed Limit
燃料供給上限
Harman EASY Touch Control Owners Manual
Need help?
Do you have a question about the EASY Touch Control and is the answer not in the manual?