Table of Contents
Advertisement
Section 6
6.1
Testing of Safety Devices
6.2
Gas Pressure Fault Test
6.3
Low Water Level Fault Test
6.4
Water Temperature Fault Test
Section 7
7.1
Maintenance Schedule
7.2
Spark Ignitor
7.3
Flame Detector
Section 8
8.1
Gas Pressure Fault
8.2
Exhaust Temperature Fault
8.3
Water Level Fault
8.4
Water Temperature Fault
A.
Temperature Controller Menus
B.
Temperature Controller Quick Reference
Chart
C.
Temperature Sensor Resistance
Charts
D.
Indoor\Outdoor Reset Ratio Charts
SAFETY DEVICE
TESTING PROCEDURES---------------------------29
6.5
Flame Fault Test
6.6
Air Pressure Fault Test
6.7
Purge Interlocks Fault Test
6.8
Safety Pressure Relief Valve Test
MAINTENANCE REQUIREMENTS----------------33
7.4
Combustion Calibration
7.5
Safety Device Testing
7.6
Manifold and Exhaust Tubes
TROUBLESHOOTING--------------------------------38
8.5
Flame Fault
8.6
Air Pressure Fault
8.7
System Fault
APPENDICES:
E.
Mode of Operation Factory Default Settings
F.
Dimensional & Parts Drawings
G.
Piping Drawings
H.
Wiring Schematics
I.
Control Box Isometric Drawing
WARRANTIES
ii
CONTENTS
Advertisement
Table of Contents
