Advertisement
FOUNDATIONS
Please refer to engineering drawings that specify overall footings layout, slab and post dimensions.
100*
GROUND
F72 mesh with
30 mm of top
cover
50 mm sand
bedding
waterproof
membrane
Absco Industries
Assembly Instruction Manual
ABSCO GABLE CARPORT
MODEL: GCPSN2
3.0mW x 6.0mD x 2.66mH
PAD FOOTING
600x600x600
600
100
SLAB
12mm
dynabolts
600
GROUND
Model: GCPSN2
1. Footings (Piers)
Prepare site and mark out
positions as per the engineering
drawings.
Dig footings then box surrounds
to form a level flat concrete
surface for fixing framework to.
TIP: *It is recommended that the
concrete should be boxed 100
mm above ground level to allow
for a future slab.
2. Slab - optional
Prepare footings as noted in A.
Pour a perfectly level slab to
the dimensions specified in the
engineering drawings.
Alternatively you may prefer
the slab to finish flush with the
outside of the footings.
The slab will be 100 mm thick,
reinforced with F72 mesh, laid 30
mm from the top. 50 mm thick
sand bedding on a water proof
membrane
No edge thickening is required
apart from the footings as
detailed.
8/6/23
5
Advertisement
