Advertisement
FRAME ASSEMBLY
Absco Industries
Assembly Instruction Manual
ABSCO GABLE CARPORT
MODEL: GCPSN2
3.0mW x 6.0mD x 2.66mH
Fly brace
Model: GCPSN2
4. Fly Bracing
Fly bracing angles are positioned
at 45 degrees from the roof purlin
to the underside of each truss.
Each truss has the following fly
braces:
2x 270 mm ZACO133 for mid
purlins
1x 450 mm ZACO134 for 1 centre
purlin
Notch one end of fly brace as
shown. This is to be bent to suit
and fit to the underside of truss
with two hex head tek screws.
40
5. Roof strapping
Lay roof strapping diagonally over
the top of the structure.
Secure one end with wafer head
tek screws into the edge beam
and clamp the other end in
position for now.
Use a spirit level and square
to check structure. Also check
dynabolts are fully tightened.
Tension the strapping to equalise
diagonal measurements. Secure
strapping to all trusses with a tek
screw where they overlap using
wafer head tek screws.
8/6/23
45 degrees
13
Advertisement
