Sharp AN-LS1 Operation Manual page 16

Set Items
(e.g.) When setting IP Address (change from 192.168.150.2 to 192.168.150.3)
M The SETUP MENU
———————— S E T U P
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
setup>1
IP Address
Please Enter
(change)
———————— S E T U P
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Unit Name
[A]Advanced Setup
[V]View All Setting
setup>v
Model Name
Unit Name
MAC Address
IP Address
Subnet Mask
Default Gateway
RS-232C Baud Rate: 9600 bps
Password
**********(Advanced Status)**********
COM Redirect Port : 10002
Accept IP Address : Accept All
Busy Reply
Input Hold Time
Auto Logout Time : 5 minutes
Port for Search
Verification of setting detail list can be omitted.
Setting details are not effective until they have been saved.
If an invalid number is entered, an error message ("Parameter Error!") will be displayed.
M E N U ——————————
[2]Subnet Mask
[5]Password
[S]Save & Quit
: 192.168.150.2
: 192.168.150.3
—> 192.168.150.3
M E N U ——————————
[2]Subnet Mask
[5]Password
[S]Save & Quit
: AN-LS1
: AN-LS1
: 08:00:1f:b1:b7:74
: 192.168.150.3
: 255.255.255.0
: Not Used
: Not Required
: ERR+<CR> code
: 1000 milliseconds
: 5006
16
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
[3]Default Gateway
[D]Disconnect All
[Q]Quit Unchanged
(Page
Enter "1" (number of item to be
set), and press the return key.
Display current IP address.
Enter IP address to be set and
press the return key.
Display IP address after
change.
Enter "v" and press the return
key to verify setting detail list.
IP address is being changed.
17)