Connecting The Ac Adaptor - Sharp AN-LS1 Operation Manual

Connecting the AC Adaptor

Take the following steps to connect AN-LS1's AC adaptor.
1
Plug the AC adaptor's DC plug into AN-LS1's DC IN jack.
2
Plug the AC adaptor into wall outlet.
There is no on/off switch. AN-LS1 turns on as soon as the connected AC adaptor is plugged into
a wall outlet. The POWER LED indicator on AN-LS1's top panel will light green to indicate that it
is receiving power.
CAUTION
The AC adaptor may interfere with reception if used near a radio.
Prevent flammables, liquids, and metal objects from entering the AC adaptor.
The AC adaptor is a sealed unit. Do not attempt to open or modify it.
Do not damage, drop, or subject the AC adaptor to vibration.
Do not leave the AC adaptor in direct sunlight.
Avoid using the AC adaptor in humid or extremely hot places.
To wall outlet
10