Part Names And Functions; Main Body - Sharp AN-LS1 Operation Manual

Part Names and Functions

Main Body

RS-232C(CONTROLLER) LINK 10BASE-T TX/RX
AN-LS1
POWER
RS-232C(PROJECTOR) INIT. DC IN
TX/RX LED indicator
Lit when transmitting data.
10BASE-T Ethernet terminal
To connect to an Ethernet LAN.
LINK LED indicator
Lit when link is active.
RS-232C terminal for controller
To connect a commercially available
controller or computer.
Wall mount screw holes
To be used for mounting AN-LS1 on a wall.
POWER LED indicator
Lit when the power supply is on.
RS-232C terminal for projector
To connect a projector.
DC power input
To connect an AC adaptor.
Initialize (INIT.) button
To initialize the settings for AN-LS1 to the
factory default settings.
To initialize the settings for AN-LS1
to the factory default settings,
connect the plug for the AC adapter
to a wall outlet to supply the power
while pressing the Initialize (INIT.)
button using a pointed tool.
4
(Page 5)
(Page 8)
(Page 5)
(Page
(Page 6)
(Page 5)
(Page
(Page 10)
(Page 51)
9)
9)