Download  Print this page

Sharp DK-A10P Operation Manual

Music system for iphone.
Hide thumbs

Advertisement

MUSIC SYSTEM FOR iPhone™
MODEL
DK-A10P
DK-A10P (BK)

OPERATION MANUAL

iPod is a registered trademark of Apple Inc.
iPhone is a trademark of Apple Inc.
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
Accessories
Please confirm that only the following accessories are included.
Remote control 1
AM loop antenna 1
RRMCGA110AWSA (DK-A10P)
(QANTL0010AWZZ)
RRMCGA111AWSA (DK-A10P (BK))
AC power cord
1
QACCD0025AW09 (DK-A10P)
QACCD0025AWZZ (DK-A10P (BK))
iPod adaptor 8
UACRTA008AW01
FM antenna
1
QANTW0004AW09 (DK-A10P)
92LFANT1535A (DK-A10P (BK))
iPhone adaptor 1
GCOVAA196AWSA (DK-A10P)
GCOVAA196AWSB (DK-A10P (BK))

Advertisement

   Related Manuals for Sharp DK-A10P

   Summary of Contents for Sharp DK-A10P

  • Page 1: Operation Manual

    Apple Inc. Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Accessories Please confirm that only the following accessories are included.
  • Page 2 SPECIAL NOTES DK-A10P DK-A10P (BK) CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS (continued) DK-A10P DK-A10P (BK) 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions : a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water,...
  • Page 5: Table Of Contents

    An independent license for such use is required. For details, please visit http://mp3licensing.com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Contents General Information Precautions .
  • Page 6: Precautions

    Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
  • Page 7: Controls And Indicators

    Controls and indicators 17 18 19 20 21 DK-A10P (BK) S/NO. The model name/serial no.label (*) Caution label (*) (*) Label is located at the bottom of the unit. Top panel 1. iPod Dock ........16 2.
  • Page 8: Rear Panel

    Controls and indicators (continued) DK-A10P DK-A10P (BK) Display 8 9 10 1. Alarm Indicator ........26 2.
  • Page 9 Remote control 1. Remote Control Transmitter ......12 2. Function Button ........13 3.
  • Page 10: System Connections

    System connections DK-A10P DK-A10P (BK) Make sure to unplug the AC power cord before making any connections. Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS jack and position the FM antenna wire in the direction where the strongest signal can be received.
  • Page 11 DK-A10P DK-A10P (BK) Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. Lights on the SNOOZE button, subwoofer and around the disc slot will blink. To cancel the demonstration mode: When the unit is in the demonstration mode, press the E SOUND/ DEMO button.
  • Page 12: Remote Control

    Remote control DK-A10P DK-A10P (BK) Battery installation This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may apply, California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/ 1 While pushing the locking tab toward the center of the remote control, slide out the battery holder. Back of remote control 2 Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the...
  • Page 13: General Control

    General control To turn the power on Press the ON/STAND-BY button to turn the power on. Lights on the snooze button, subwoofer and around the disc slot will light up. Note: iPod dock door will automatically open when the power is on. After use: Press the ON/STAND-BY button to enter the power stand-by mode or demonstration mode.
  • Page 14: Setting The Clock

    Setting the clock DK-A10P DK-A10P (BK) In this example, the clock is set for the 12-hour (12:00 AM) display. Press the CLOCK button for more than 2 seconds. Press the button to select 12-hour or 24-hour display and then press the CLOCK button. The 12-hour display will appear.
  • Page 15: Ipod And Iphone

    Please use the adaptor supplied with your iPod unit. If you have an iPod that does not have an iPod connector, you can use an audio cable to connect it to the AUX IN jacks. DK-A10P DK-A10P (BK) Capacity 4GB &...
  • Page 16 Listening to the iPod or iPhone (continued) DK-A10P DK-A10P (BK) To insert iPod or iPhone adaptor 1. Press the ON/STAND-BY button to turn the power on. The iPod terminal door will automatically open when the display is on. 2. Insert the iPod or iPhone adaptor into unit and connect your iPod or iPhone.
  • Page 17 Navigating the iPod or iPhone menus with the remote control Press the CLEAR button to view the menu on iPod unit. Press it again to go back to previous menu. Use the TUNING ( ) button to select an item on the menu and then press MEMORY button.
  • Page 18: Listening To A Cd Or Mp3/wma Disc

    CD-R/RW with MP3 or WMA files, but cannot record on them. the pause mode, press Some audio CD-R and CD-RW discs may not be playable due to the button to start state of the disc or the device that was used for recording.
  • Page 19 Press the ON/STAND-BY button to turn the power on. Press the CD button. Insert the disc into the disc slot, label side up The disc must be fully inserted into the disc slot before playing. If “NO DISC” appears due to improper disc insertion, switch off the AC power supply and then switch it on again.
  • Page 20: Advanced Cd Or Mp3/wma Disc Playback

    Advanced CD or MP3/WMA disc playback DK-A10P DK-A10P (BK) Repeat play Repeat play can play all tracks on a disc, folder or a programmed sequence continuously. To repeat play: Press the PLAY MODE button on the remote control. Press the button.
  • Page 21 Programmed play You can choose up to 32 selections for playback in the order you like. While in the stop mode, press the MEMORY button to enter the programming save mode. Press the button to select the desired track. Press the MEMORY button to save the track number. Repeat steps 2 - 4 for other tracks.
  • Page 22: Mp3/wma Folder Mode (only For Mp3/wma files)

    To playback MP3/WMA (Windows Media Audio) file There are many music sites on the internet that you can download MP3/WMA (Windows Media Audio) music files from. Follow the instructions from the website on how to download the music files. You can then playback these downloaded music files by burning them to a CD-R/RW disc.
  • Page 23 Procedure to playback MP3/WMA disc To play back CD-R/RW. Press the CD button, and insert an MP3/WMA disc. After disc is inserted and TOC reading, disc info will be displayed. MP3 indicator CD indicator WMA indicator In case folder is selected, proceed to step 2. In case file is selected, proceed to step 4.
  • Page 24: Listening To The Radio

    Listening to the radio DK-A10P DK-A10P (BK) Auto power on function: When you press any of the following buttons, the unit turns on. TUNER button (main unit): The unit turns on and the TUNER function is activated. button (main unit and remote control): The unit turns on and playback of the last function starts (iPod, CD, TUNER, AUX).
  • Page 25 Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Perform steps 1 - 3 in “Tuning” on page 24. Press the MEMORY button to enter the preset tuning saving mode.
  • Page 26: Alarm And Sleep Operation

    Alarm and sleep operation DK-A10P DK-A10P (BK) Alarm The unit turns on and play desired source (iPod, CD, TUNER, AUX) or Buzzer sound for 30 minutes. Before setting the alarm: 1 Check that the clock is set to the correct time (refer page 14). If it is not set, you cannot use the alarm function.
  • Page 27: Radio

    Snooze function Once timer has started, pressing the SNOOZE/DIMMER button will stop alarm for 5 minutes. Once the snooze time has expired, alarm will continue. To turn off the alarm function During alarm or snooze, press the ALARM ON/OFF button to turn it off.
  • Page 28: Enhancing Your System

    Use a connection cord to connect the VCR, DVD etc. to the AUX IN jacks. White When using video equipment, connect the audio output to this unit and the video output to a television. Press the ON/STAND-BY button to turn the power on.
  • Page 29: Troubleshooting Chart

    Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. General Symptom Possible cause The clock is not set to Is the Summer Time switch set to the the correct time.
  • Page 30: Maintenance

    Troubleshooting chart (continued) DK-A10P DK-A10P (BK) If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.
  • Page 31: Specifications

    Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 32: Consumer Limited Warranty

    One (1) year parts and labor from the date of purchase. y): Non-functional accessories, supplies, and consumable items. To find a location of the nearest Sharp Authorized Servicer, call Sharp toll free at 1-800-BE-SHARP. P Be sure to have Proof of Purchase...

This manual also for:

Dk-a10p(bk)

Comments to this Manuals

Symbols: 0
Latest comments: