Table of Contents
Advertisement
SETTINGS
Programming radio stations –
manually
1
Switch on the hi-fi system from standby mode
8
by pressing »
«.
2
Press »MODE« and rotate Jog-Shuttle to find
»FM TUNER« on display and confirm by press-
ing on the Jog-Shuttle.
3
Press »MENU« and rotate the Jog-Shuttle to
find »TUNE« on display and confirm by press-
ing on the Jog-Shuttle.
4
Rotate the Jog-Shuttle to find the required fre-
quency.
– Display: the frequency changes in steps of
50 kHz.
5
To store the radio station press »PROG.«.
– Display: »PROG« and preset number flashes.
6
Press number buttons »1« or »9« to store sta-
tions in preset position »P01« or »P09«.
Note:
To store presets »P10« to »P40«, first press
7
»+10« (for the tens digit) and then »1« to
»9«, (for the units digit). If you do not press
any button for the units digit, it will be auto-
matically set to »0«.
7
To store more stations, repeat step 4 to 6.
Note:
If stations are already stored in the preset
7
positions, they are overwritten when new
stations are stored.
---------------------------------------------------------------------------------------------------------------------------------------
Adjusting the brightness of the
display
1
Repeatedly press »BRIGHT« on the remote
control to change the brightness of the display
in four levels.
Notes:
Minimum power consumption in standby
7
mode is only achieved if the backlighting in
the display is switched to minimum.
It is possible to use different brightness for
7
operating mode and stand by mode.
17
ENGLISH
Advertisement
Table of Contents
