Troubleshooting - Baumatic BWC6038FS Instruction Manual

TROUBLESHOOTING

IMPORTANT: If your Wine Cabinet appears not to be operating properly,
before contacting the Customer Care Department, please refer to the
checklist below.
No.
1 The Wine Cabinet does not operate
2 The Wine Cabinet is not cold enough
Automatically turn-on and
3
turn-off frequently
4 The lighting does not work
5 Too much vibration
The Wine Cabinet seems to make
6
too much noise
7 The door will not close properly.
The display window is shown with "HH"
8 or "LL" instead of a digital figure,
and/or with continuous beep sound.
PROBLEM POSSIBLE CAUSE
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to the Wine
Cabinet.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The lighting is turned off.
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused
by the flow of refrigerant.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The appliance is not level.
The Wine Cabinet is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
The temperature probe is out of order.
.30.