Troubleshooting - Baumatic BWCDZ150SS1 User Manual

Troubleshooting

IMPORTANT: If your wine cabinet appears not to be
operating properly, before contacting Baumatic Service
Care, please refer to the checklist below.
PROBLEM
Wine Cabinet does not operate
Wine Cabinet is not cold enough
Automatically turn-on and turn-off
frequently
The lighting does not work
Too much vibration
The Wine Cabinet seems to make too
much noise
The door will not close properly.
The LED display window is shown a "HH"
or "LL" and/or emit a continuous buzz
sound.
POSSIBLE CAUSE / MEASURE
Not plugged in.
Wine Cabinet is turned off.
The circuit breaker has tripped or the fuse has blown.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to the
Wine Cabinet.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker has tripped or the fuse has
blown. The lighting is turned off.
Check to assure that the appliance is level.
Check to assure no parts inside the cabinet or in the
compressor chamber are loose.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The appliance is not level.
The Wine Cabinet is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
The temperature control is out of order.
17