Toshiba MMU-UP0051MH-E(TR) Service Manual page 186

No. Part name
Horizontal 1. Detachment
louver
(1) Remove the intake grille and the access panel.
(Carry out the works items
(2) Remove three screws that fixes the shield plate
assembly to remove the shield plate assembly.
(3) Remove two screws that fixes the discharge grille
assembly. Draw the discharge grille toward you while
lifting it upward slightly to remove it.
* Be careful not to lose the supporting plate.
(4) Turn the horizontal louver in the vertical direction and
draw it toward you to remove it from the discharge
grille frame
(5) Remove the horizontal louver from the center clamp.
(five places at the center)
* Lift the horizontal louver to diagonally upward.
(6) Remove the horizontal louver from the louver joint (five
places).
2. Attachment
(1) Carry out reversing the detachment procedure,
attaching the horizontal louver.
* Apply the grease to the receptor of axis (five places)
Procedure
when replacing the center clamp.
(Recommended grease : Shinetsu Silicone HIVAC-G)
-1 and -1.)
– 186 –
Remarks
Shield plate
assembly
Screw
3 pieces
Discharge grille
assembly
Screw
2 pieces
Supporting
plate
Horizontal louver
Discharge grille frame
2
1
Horizontal louver
Center clamp
Louver joint
Horizontal
louver