Toshiba MMU-UP0051MH-E(TR) Service Manual page 172

No. Part name
1. Detachment
Refrigerating
cycle
(1) Recover the refrigerating gas.
assembly
(2) Remove the connecting pipes.
(Liquid pipe and gas pipe)
(3) Following to works in 1 of
parts.
(4) Remove the filter.
(No screw fixing)
(5) Remove the wire guard.
(M4 screw UP007 to UP009 : 3 pieces, and UP012 to
024 : 4 pieces)
(6) Remove the front panel (lower).
(M4 screw UP007 to UP009 : 3 pieces, and UP012 to
024 : 4 pieces)
(7) Remove the front panel (upper).
(M4 screw UP007 to UP009 : 3 pieces, and UP012 to
024 : 4 pieces)
(8) Remove the piping cover (Left).
(M4 screw: 2 pieces)
(9) Remove the sensor lead and the PMV lead from the
clamp.
(10) Remove the piping cover (Right).
(11) Take off the screws which fix the drain pan, slide it
(12) Remove the dashboard of the heat exchanger.
(13) Slide the heat exchanger toward right, remove the
2. Attachment
Following to the works in 1 of
parts as original in the reverse procedure.
Procedure
(M4 screw: 3 pieces)
toward right, remove the drain pan from the side
plate (Left), and then draw it toward you.
(M4 screw: 4 pieces)
end plate of the heat exchanger from the side plate
(left), and then draw away the refrigerating cycle
assembly toward you.
, and (1) to (13), attach the
and (1) to (5), detach the
– 172 –
Remarks
Clamp Clamp Clamp
Sensor lead,
PMV lead