Installing The Fork Protector; Removing The Fork Legs - KTM 350 EXC-F 2021 Owner's Manual

12.6

Installing the fork protector

12.7

Removing the fork legs

–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
–
Position the fork protector on the right fork leg. Mount and
V00332-11 tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove the cable ties.
–
Remove screws
–
Hang the brake caliper and the brake line loosely to the side.
K00545-10
(EXC‑F EU, XCF‑W, EXC‑F BR)
–
Loosen screws
–
Loosen screws
V01756-10
SERVICE WORK ON THE CHASSIS 12
1
.
M6 10 Nm (7.4 lbf ft)
2
.
3
.
M6 10 Nm (7.4 lbf ft)
while the engine is
( p. 113)
1
and take off the clamp.
2
and take off the brake caliper.
3
. Take out the left fork leg.
4
. Take out the right fork leg.
p. 128)
p. 63)
65