KTM 350 EXC-F 2021 Owner's Manual page 129

Guideline
(All EU models)
Fuse 1 ‑ 10 A - EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector, fuse 4
Fuse 2 - 10 A - high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan (optional), horn, brake light,
turn signal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
(All BR/CN models)
Fuse 1 – 10 A – EFI control unit, combination instru-
ment, combination switch (optional), electronic fuel
injection, diagnostics connector, fuse 4
Fuse 2 - 10 A - high beam, low beam, position light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan (optional), horn, brake light,
turn signal
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
(XCF‑W)
Fuse 1 ‑ 10 A - EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector, evaporate
emission control system, fuse 4
Fuse 2 – 10 A – low beam, position light, tail light,
license plate lamp
Fuse 3 - 10 A - radiator fan
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Insert a spare fuse in the fuse box so that it is available
if needed.
ELECTRICAL SYSTEM 15
A
.
p. 162)
p. 162)
127