Lubricating The Steering Head Bearing; Removing Front Fender - KTM 350 EXC-F 2021 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.16
12.17
74

Lubricating the steering head bearing

H02387-01

Removing front fender

V00340-10
V00341-10
–
1
Tighten screws .
Guideline
Screw, top triple
clamp
–
Mount and tighten screw
Guideline
Screw, top M8
steering stem
Finishing work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
(EXC‑F EU, XCF‑W, EXC‑F BR)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(All Six Days models)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the headlight mask with the headlight. (
Main work
(EXC‑F EU, XCF‑W, EXC‑F BR)
–
1
Remove screws .
–
2
Remove screws . Remove front fender.
M8 17 Nm (12.5 lbf ft)
2
.
17 Nm (12.5 lbf ft)
Loctite
p. 72)
p. 63)
( p. 67)
( p. 68)
( p. 67)
( p. 70)
while the engine is
p. 128)
® 243™