Table of Contents
Advertisement
Macerated waste
inlet
Wastewater outlet
The drainpipe to be installed must slope downwards by 1% and fitted without a trap. It is not suggested
these machines can be fitted with Grease Recovery Units (GRU's) but should be installed upstream of
the sites grease trap.
Water flow sensors: these sensors prevent the machine from operating without water. If there is no
water to either of the sensors a message will be displayed on the display screen.
Electrical Installation
IMPORTANT:
All electrical installations must be performed by a qualified electrician in accordance with
IEE Codes of Practice.
For safety reasons these instructions must be followed. Any deviation from these instructions will result
in a breach of conditions of sale and voiding the warranty contract.
Examine the rating plate located as shown below to ensure that the characteristics shown are correct
for the supply available.
Hot
water connection for the cycling
cycle
Example of a 2"/50mm rubber straight
connector
Location & example of the serial rating plate
Ecofast Environmental UK Ltd
6
Advertisement
Table of Contents
