EcoFast D600 Product Manual page 10

The machine is intended to process food waste only.
Always process a mixture of materials and not just one type, especially if it is a dry material. Dry
material must be fed into the hopper slowly to avoid blockages.
The following are considered improper use of this machinery:
 Inserting in the hopper material other than food waste
 Washing the machine by pressure jet
 Installing and use the machine in area with high dust concentration or oily substances
suspended in the air
 Installing and use the machine in open air
 Installing and use the machine in potentially explosive atmosphere or in area with open
flames
 Tampering the machine in any way
 Operating the emergency button in absence of a real danger
 Removing the identification label
 Pouring any kind of soap or detergent into the hopper
 Washing the lid in the washing machine
 Using the machine wearing dresses with large sleeves, scarves, ties, bracelets and
necklaces
Bin Full.
The system operates a sensor that monitors the level of the dewatered food waste to prevent over
filling.
If the bin full message is displayed on the operator display, the machine will stop working to
prevent over filling.
Replace the bin with an empty one and press the start button to reset and restart the machine.
Once the operation has finished and the rinse cycle is initiated, there is a very fine spray that
activates to clean the waste ejector. This will not alter the overall dewatered food waste is it is a
very fine spray – refer to
Emergency Stop Button
during normal operation. This isolates the machine and prevents any cleaning function taking place.
Operator Control Panel
Operator display indicating the system activity
Start button – press and hold to initiate
Stop button – press and hold to initiate
Cleaning button
Cleaning of the machine for end of day procedure.
is only to be used in an emergency & not as a way to stop the machine
- to be used at the end of each day
Ecofast Environmental UK Ltd
Emergency Stop Button
10