Table of Contents
Advertisement
Accessing the Dewaterer bottom flange, seals and bearings
1. To access the bottom flange assembly, the top flange needs to be removed as detailed above and the
stainless steel body needs to be removed.
2.
To remove the auger, remove the belt and pulley assemblies from underneath the main flange assembly,
this will allow access and removal of the bottom bearing and seals.
Where to find further help / contact details
We at Ecofast are here to help! Within the UK we have over 20 years of Food Waste Management
design, project installation and servicing knowledge.
We have offices in the UK, Italy, Dubai and China. Our Research and Design facility is based in Milan,
Italy and the production facility is spread between the UK and Italy.
Our UK contact details are
Ecofast Environmental UK Ltd (Factory Address);
Haygarth Park, Blaenau Ffestiniog LL41 3PF
Office phone number – +44 (0)1691 887760
Website –
www.ecofastuk.com
Email addresses –
info@ecofastuk.com
steve@ecofastuk.com
@EcofastUk
EC090122 Lip Seal 50x68x8
EC090121 Lip Seal 50x65x8
EC090124 Bottom Bearing
ecofastenvironmentalukltd
Ecofast Environmental UK Ltd
26
Advertisement
Table of Contents
