Table of Contents
Advertisement
The cup rim sensor is released.
Clean the cup rim sensor by hand
with a mild solution of warm water
and liquid dish soap.
Tip: To give the cup rim sensor an extra
thorough clean, clean it in the
dishwasher from time to time.
To reinstall the cup rim sensor, press
it into the holder on the central spout
from below.
Cleaning the milk flask with lid
The milk flask should be taken apart
and cleaned every day after use.
Both the lid and the glass flask can be
cleaned in the dishwasher, or by hand
using a mild solution of warm water and
liquid dish soap.
Remove and empty the milk flask.
Rinse the milk pipework in the lid
under running water and then place
the milk flask lid in the dishwasher.
If no water runs out of the connecting
piece , clean it with the cleaning
brush.
Clean the glass flask.
Cleaning and care
Dry all parts and especially the
threads on the lid and on the glass
with a clean cloth.
Reassemble the milk flask.
Clean the milk flask holder on the
coffee machine with a damp cloth.
Cleaning the milk valve (daily)
The milk valve seal can be damaged
by objects with sharp edges or
similar.
Do not use any sharp-edged objects,
e.g., knives, to clean the milk valve.
Clean the milk valve every day. If
allowed to dry, milk residues can
become encrusted on the stainless
steel bolt. These crusty deposits are
difficult to remove. Therefore, it is
important to carry out regular cleaning
after preparing milk.
69
Advertisement
Table of Contents
