Clean the milk pipework
display.
Confirm the message with OK.
Follow the instructions on the display.
When
Fill water container with lukewarm
water and cleaning agent up to the
appears in the display,
symbol and insert
proceed as follows.
Open 2 sticks of the cleaning agent
for milk pipework and empty the
contents into the water container.
Fill the water container to the
mark with lukewarm water and stir
the solution.
Follow the instructions for the mixing
ratio carefully. Do not fill the water
container with too little water.
Otherwise, cleaning will be
incomplete.
Reinsert the water container.
Close the appliance door.
Follow the instructions on the display.
If prompted to do so in the display,
rinse the water container thoroughly
with clean water. Make sure that no
will appear in the
Cleaning and care
cleaning agent is left in the water
container. Fill the water container with
fresh drinking water.
The cleaning process is finished when
appears in the display.
Program finished
Degreasing the brew unit and
cleaning the interior
The brew unit must be degreased
regularly in order to ensure aromatic
coffee and trouble-free operation of the
coffee machine. Depending on the
natural oil content of the coffee used,
the brew unit can become blocked
quite quickly.
You can run the maintenance program
with the Miele Cleaning Cartridge or
with cleaning tablets for degreasing the
brew unit. The maintenance program
lasts for approx. 10 minutes.
If you have switched on automatic
cleaning and inserted a ready-to-use
cleaning cartridge, the
brew unit
maintenance program will run
using the cleaning cartridge.
If you have not inserted a Miele
Cleaning Cartridge, the following
message will appear in the display after
200 portions:
Degrease the brew unit
Confirm the message with OK.
This message will keep being displayed
until the brew unit has been degreased.
Degrease the
.
79