Table of Contents
Advertisement
Installation
Removing transport restraints
2 screw holes are fitted with red silicone
plugs to protect the appliance against
transport damage and secure the door
during transport.
Remove the plugs before screwing
the coffee machine to the cabinet
unit.
Pull firmly on the red silicone plugs to
remove them from the screw holes.
The plugs are not required for any
other purpose. Dispose of them with
your household waste.
Pushing in and aligning the coffee
machine
When pushing the machine into the
niche, make sure that the electrical
and plumbed-water connections do
not get trapped or damaged.
Push the coffee machine all the way
into the niche until you feel a
resistance.
112
Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the machine.
Never align the coffee machine by
adjusting the door hinges. This will
prevent the milk flask from attaching
correctly and interfere with the milk-
preparation process.
Screwing the coffee machine to the
cabinet
Open the appliance door.
Four TX20 (25 mm) screws are
supplied with the machine.
Secure the coffee machine to the side
walls of the cabinet using the screws
supplied. Start with the top-left
screw. Proceed in a clockwise
direction to tighten the other screws.
Tighten all screws by hand.
Carry out a functional check on the
coffee machine.
Advertisement
Table of Contents
