Table of Contents
Advertisement
MotionReact
The movement sensor detects when
you approach the touch display with
your hand or body. You can activate the
following functions individually:
- Switch the light on: You can decide
whether the light should come on
when the coffee machine is on or off.
- Acknowledge buzzer: Audible signal
sounds are suppressed, e.g., in the
event of the message
the water container
- Switch the appliance on: The start
screen is displayed.
The movement sensor is deactivated by
default.
If you want the movement sensor to
respond even when the coffee
machine is switched off, activate
QuickTouch as well (
|
).
QuickTouch
On
When the system lock is activated, the
movement sensor functions are
deactivated.
System lock
You can lock the coffee machine to
prevent it from being used by
unauthorized persons, such as children.
Fill and replace
.
Display
|
When the system lock is activated, the
settings for the
On at
movement sensor are deactivated.
The coffee machine will not switch on
at the set time and/or will not respond
to movement when someone
approaches it.
Temporarily deactivating the system
lock
Tap the display for 6 seconds.
The system lock is reactivated when the
coffee machine is next switched off.
Miele@home
The following points may appear under
Miele@home:
- Set up: This option only appears if
the coffee machine has never been
connected to a Wi-Fi network or if the
network configuration has been reset.
- Deactivate*/Activate*: The settings
for the Wi-Fi network are retained,
but the network is switched on or off.
- Connection status*: Information
about the Wi-Fi connection is
displayed. The symbols indicate the
strength of the connection.
- Set up again*: The settings for the
current Wi-Fi network will be reset.
The Wi-Fi connection will be set up
again.
- Reset*: The Wi-Fi is switched off and
the settings for the current Wi-Fi
network will be reset.
Settings
timer and the
57
Advertisement
Table of Contents
