WARNING:
Before working inside your tablet, read the safety information that shipped with your tablet and follow the steps in
Before working inside your
more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Adhere the display cable to the back-cover assembly.
2
Connect the display cable to the system board.
3
Adhere the display cable to the connector on the system board.
Post-requisites
Replace the battery.
Replacing the display assembly
tablet. After working inside your tablet, follow the instructions in
After working inside your
tablet. For
Replacing the display assembly
30
43