5. Reinstall the discrete graphic card.
6. Reinstall all the removed parts, and then reconnect the cables.
Wireless projector board and bracket
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 58.
2. Remove the system board shield. See "System board shield" on page 59.
3. Disconnect the wireless projector cable from the system board. Remove three screws. Then, remove the
wireless projector board.
.
Chapter 6
Hardware removal and installation
67