Panel Housing Assembly - Lenovo Yoga AIO 7 Gen 3 Hardware Maintenance Manual

Replacement procedure
1. Remove the computer stand. See "Computer stand" on page 73.
2. Loosen antennas cables from cable hooks. Then, remove the antennas.
3. Reinstall the antennas.
4. Reinstall all the removed parts, and then reconnect the cables.

Panel housing assembly

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Remove the base support assembly. See "Base support assembly" on page 75.
2. Remove four screws. Then, remove the panel housing assembly.
.
Chapter 6 Hardware removal and installation
77