M90a Gen 2
VESA mount bracket cover
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
CAUTION:
Before you open the VESA mount bracket cover, turn off the computer and wait several minutes until
the computer is cool.
For access, remove the following parts in order, if any:
• "Computer stand" on page 64.
• "Rear cover" on page 67.
• "Optical drive" on page 68.
• "Optical drive holder" on page 70.
• "System board shield" on page 71.
.
73
Chapter 6
Hardware removal and installation