4K Output Select
You can set how to record movies and perform HDMI output when your
camera is connected to 4K-compatible external recording/playback
devices, etc.
1
Turn the mode dial to
2
Connect the camera to the desired device via an HDMI cable.
3
MENU
(Setup) [ 4K Output Select] desired setting.
Memory Card+HDMI: Simultaneously outputs to the external
recording/playback device and records on the camera's memory card.
HDMI Only (30p): Outputs a 4K movie in 30p to the external recording/
playback device without recording on the camera's memory card.
HDMI Only (24p): Outputs a 4K movie in 24p to the external recording/
playback device without recording on the camera's memory card.
HDMI Only (25p)*: Outputs a 4K movie in 25p to the external
recording/playback device without recording on the camera's
memory card.
* Only when [NTSC/PAL Selector] is set to PAL.
Note
• This item can be set only when the camera is in movie mode and connected
to a 4K-compatible device.
• When [HDMI Only (30p)], [HDMI Only (24p)] or [HDMI Only (25p)] is set,
[HDMI Info. Display] will temporarily be set to [Off].
• A 4K movie is not output to the connected 4K-compatible device during slow-
motion/quick-motion shooting.
• When [HDMI Only (30p)], [HDMI Only (24p)] or [HDMI Only (25p)] is set, the
counter does not move forward (the actual recording time is not counted)
while the movie is being recorded on an external recording/playback device.
• When shooting 4K movies using the setting [Memory Card+HDMI], the
movies will not be output to a device connected by HDMI cable if you
simultaneously record a proxy movie. If you want to perform HDMI output,
set [
Proxy Recording] to [Off]. (In this case, if you set [
to other values except [24p], the image will not be displayed on the screen of
the camera).
(Movie).
Record Setting]
GB
157