Camera Settings; Power Save Start Time; Ir Remote Ctrl - Sony a9 II Help Manual

Camera settings

Power Save Start Time

Sets time intervals to automatically switch to power save mode when you
are not performing operations to prevent wearing down the battery pack.
To return to shooting mode, perform an operation such as pressing the
shutter button halfway down.
MENU  (Setup)  [Power Save Start Time]  desired
setting.
30 Min/5 Min/2 Min/1 Min/10 Sec
Note
• Turn off the product when you do not use it for a long time.
• The power save function is deactivated in the following situations:
– While power is being supplied via USB
– While playing back slideshows
– During FTP transfer
– While recording movies
– While connected to a computer or TV
– When [IR Remote Ctrl] is set to [On]
– When [Bluetooth Rmt Ctrl] is set to [On]

IR Remote Ctrl

You can operate this product and shoot images using the SHUTTER
button, 2SEC button (2 second delay shutter), and START/STOP button
(or Movie button (RMT-DSLR2 only)) on the Wireless Remote Commander
RMT-DSLR1 (sold separately) and RMT-DSLR2 (sold separately). Refer also
to the operating instructions for the Infrared Remote Commander.
MENU  (Setup)  [IR Remote Ctrl]  desired setting.
On: Allows infrared remote commander operation.
Off: Does not allow infrared remote commander operation.
GB
195