FEL lock
The flash level is automatically adjusted so that the subject gets the
optimum exposure during normal flash shooting. You can also set the
flash level in advance.
FEL: Flash Exposure Level
1
MENU
desired button, then assign the [FEL Lock toggle] function to
the button.
2
Center the subject on which
FEL is to be locked, and adjust
the focus.
3
Press the button to which [FEL Lock toggle] is registered, and
set the flash amount.
• A pre-flash flashes.
• The
(FEL lock) lights up.
4
Adjust the composition and
shoot the image.
• When you want to release the
FEL lock, press the button to
which the [FEL Lock toggle] is
registered again.
Hint
• By setting [FEL Lock hold], you can hold the setting while the button is
pressed down. Also, by setting [FEL Lock/AEL hold] and [FEL Lock/AEL tggle.],
you can shoot images with the AE locked in the following situations.
– When [Flash Mode] is set to [Flash Off] or [Autoflash].
– When the flash cannot go off.
– When using an external flash that is set to manual flash mode.
(Camera Settings 2) [
Custom Key]
GB
141