Disp Button (Monitor/Finder) - Sony a9 II Help Manual

Note
• The viewfinder display and the monitor display for shooting can be set
separately. Look through the viewfinder to set the display settings for the
viewfinder.
• The information in the histogram display does not indicate the final
photograph. It is information about image displayed on the screen. The final
result depends on the aperture value, etc.
• The histogram display is extremely different between shooting and playback
in the following cases:
– When the flash is used
– When shooting a low luminance subject such as a night scene
• In movie mode, [For viewfinder] cannot be displayed.
Hint
• The following are not displayed in the default settings.
– Graphic Display
– Monitor Off
– Display All Info. (when using the viewfinder)
To change the display modes that are switched when you press the DISP
button, select MENU 
the setting.

DISP Button (Monitor/Finder)

Allows you to set the screen display modes that can be selected using
DISP (Display Setting) in shooting mode.
MENU  (Camera Settings 2)  [DISP Button]  [Monitor]
or [Finder]  desired setting  [Enter].
The items marked with
Graphic Display: Shows basic shooting information. Graphically shows
the shutter speed and aperture value.
Display All Info.: Shows recording information.
No Disp. Info.: Does not show recording information.
Histogram: Displays the luminance distribution graphically.
(Camera Settings 2)  [DISP Button] and change
are available.
GB
33