Midea MPPD33H Owner's Manual & Installation Manual page 38

SLEEP Function
Press SLEEP button
The SLEEP function is used to decrease
energy while you sleep(and don't need
the same temperature settings to stay
comfortable). This function can only by
activated via remote control.
For the details, please see "sleep operation "
in " USER'S MANUAL ".
The SLEEP function is not available in
NOTE:
FAN or DRY mode.
I SENSE (some models)
Press I SENSE button
When the I SENSE function is activated, the
remote display is actual temperature at its
location. The remote control will send this
signal to the air conditioner every 3 minutes
interval until press the I SENSE button again.
LOCK function
5s
+
or
5s
Press together
LED
button at the same time more
LED and °C/°F
than 5 seconds to activate Lock function.
All buttons will not response except pressing
these two buttons for two seconds again to
disable locking.
11
5s
5s
+
button and
I SENSE or