Table of Contents
Advertisement
4.4
Burner dimensions
Flange
180
130
150
4.5
Firing rate
The MAXIMUM OUTPUT is chosen from within the diagram area
(Fig. 3).
The MINIMUM OUTPUT must not be lower than the minimum
limit of the diagram.
The burner delivery must be selected within area of the diagrams
(Fig. 3). This area is called firing rate and provides the maximum
delivery of the burner in relation to the pressure in the combustion
chamber.
0.8
0.6
0.4
0.2
0
1.5
20
20163551
Technical description of the burner
125
2.0
2.5
25
30
Burner
125
D4673
The work point may be found by plotting a vertical line from the
desired delivery and a horizontal line from the pressure in the
combustion chamber. The intersection of these two lines is the
work point which must lie within the firing rates.
The firing rate area values have been obtained
considering a surrounding temperature of 20 °C,
and an atmospheric pressure of 1013 mbar (ap-
prox. 0 m above sea level).
WARNING
D5223
Fuel output - kg/h
3.0
Thermal power - kW
35
8
GB
110
194
26
Fig. 2
Fig. 3
Advertisement
Chapters
Table of Contents
